![]() Hover the cursor along the wall that will be used for the entry, move the cursor towards the center of the structure until the landing is oriented correctly, then click to place the staircase. You will notice that a U-shaped staircase is now following your cursor.The walls can be made of concrete blocks, poured concrete, or precast concrete panels and are reinforced with steel. While Floor 0 (foundation) is the active floor, select Build> Stairs> U-Shaped Stair, and in the New Shaped Staircase dialog that displays, choose the Default Direction, specify a Gap value if one is desired, then click OK. A stem wall foundation consists of a concrete slab supported by continuous walls, or stems, that extend from the footing to the slab level. The structures require three components for their construction a poured slab or wood subfloor, a foundation wall, and a spread footing.Your foundation may now look similar to the following image if you have specified pony walls:.In the New Floor dialog that displays next, select Derive new foundation plan from 1st floor plan, then click OK.In this example, a value of 101 1/8" is used, giving us a Basement Ceiling Height of 97 1/8", as shown in the image above. Under the Stem Walls section, specify a Minimum Height sufficient for a full height basement.To learn more about pony walls, see the "Drawing a Pony Wall" resource in the Related Articles section below. In this example, we specified a pony wall with a Siding-6 wall type for the upper portion, and 8" Concrete Stem Wall for the lower portion. ![]() To do so, select the Edit Default Foundation Wall button to open the Foundation Wall Defaults, and on the Wall Types panel, choose your desired Wall Type(s).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |